If you want to install a saddle with a raised rear or change the shape of your motorcycle, this product is ideal .
The buckle is a part to be attached to the rear of the motorcycle to close the frame.
This makes it possible to make the rear part of the motorcycle more aesthetic.
The rear scrambler buckle is made by hand in steel . The steel is untreated. It is available in 22 or 25 mm diameter and in several different widths.
Please note that the width is not measured at the center distance but the external width is the widest distance.
The model is available in width: 175, 195, 205, 215, 225, 235 and 250 mm.
The long and raised rear scrambler rear loop is ideal if you want to install a flat saddle or modify a quirky frame with a more classic line.
The scrambler rear loop ideally installed by being welded to the frame or the original buckle.
You can tighten the parts at the end to match your chassis.
We can make the loop longer if you wish (a supplement may be requested depending on the length to cover the additional shipping costs).
Here is an illustration of a short loop:
The dimensions expressed correspond to the following dimensions:
Attention: The width expressed is the external width, distance between the ends of each side.
Length: +/- 55cm
The buckle is raw, it may have surface rust. This does not prevent its proper use.
This product is made to order.
PAIEMENT EN 4 FOIS
TESTÉ ET APPROUVÉ