PAIEMENT EN 4 FOIS
TESTÉ ET APPROUVÉ
It is ideal to change the buckle of your motorcycle in order to purify it by closing the frame of the motorcycle . This greatly improves the look of the bike.
With an integrated LED strip loop , it allows to remove the unsightly original lights and make the motorcycle more minimalist .
Our loops with the compartment for the LED strip are made by hand and finishing work is done on them.
The LED strip allows you to remove your rear light and turn signals . Indeed, it has turn signals , taillights and STOP light.
Our flat black saddle on ABS base is handmade by our saddler craftsman .
The lot consists of 3 pieces:
- a saddle with 3 supports.
- a short flat loop with compartment for the LED strip
- a 48 LED strip already attached
Width: 19 cm tank side and 24.8 cm at the widest
Diameter: 22mm or 25mm
Buckle width: from 175 mm to 250 mm
The width corresponds to the width at the widest, the outer width of the loop (see the photo below):
Number of LEDs: 48 LEDs
The LED strip is already attached.
The wiring correspondence of the LED strip is as follows:
It may be necessary to install an LED indicator unit and resistors for the lights (in the case of replacing lights with bulbs). Do not hesitate to ask us for advice .