RECHERCHE PAR INSPIRATIONS
- Shock absorbers
- Thermal bands
- Aluminum boxes
- Rear curls
- Bubbles
- Turn signals
- Commodos
- Meters
- Rear shells
- Exhaust
- Rear lights
- Air filters
- Forks
- Wardrobe
- Handlebars
- Brake and clutch levers
- Side plates
- Handles
- Headlights
- Footrest
- Tanks
- Mirrors
- Stool
- Silent
- Fork bellows
- Insurance supports
- License plate supports
- Shock absorbers
- Thermal bands
- Aluminum boxes
- Rear loops
- Bubbles
- Turn signals
- Commodos
- Meters
- Rear shells
- Swine
- Rear lights
- Air filters
- Forks
- Wardrobe
- Handlebars
- Brake and clutch levers
- Side plates
- Handles
- Headlights
- Footrest
- Tanks
- Mirrors
- Stool
- Silent
- Fork bellows
- Insurance supports
- License plate supports
RECHERCHE PAR MARQUES DE MOTO
2 in 1 pipe and carburetor for Virago 125 - 250
X001F9INWF
176.00€
- New version 2023
- For YAMAHA VIRAGO XV 125 and 250
- Ideal for bobber or chopper preparation
- It attaches perfectly to the cylinders without modifications
- Stainless steel pipe
- New version 2023
- For YAMAHA VIRAGO XV 125 and 250
- Ideal for bobber or chopper preparation
- It attaches perfectly to the cylinders without modifications
- Stainless steel pipe
Discover a 2 in 1 carburetor kit specially designed for the YAMAHA VIRAGO 125 and 250.
This allows you to move on to a carburetor and move it to 90 degrees.
New version September 2023: the kit now has nozzles and a black tulip with grid.
This product is ideal for preparation bobber Or chopper.
The kit consists of the following elements:
- 2 in 1 stainless steel pipe
- 3 sleeves with 6 collars
- PE28 type carburetor
- A black tulip with 50 MM grid
- A batch of main jets from 75 to 98
- A set of secondary sprinklers from 32 to 55
There pipe is planned for this carburetor type PE 28 which is suitable for Virago 125 & 250.
It will, of course, be necessary adjust the carburetor to suit your motorcycle with the appropriate sprinklers.
The setting depends on your engine capacity and your preparation (exhaust, air filter, ignition, etc.).
If in doubt, call a professional for installation.
This product is not intended to increase the performance of the motorcycle. The objective is aesthetic.
Examples of installation on Christophe’s Virago:
On Julien's project:
4-INSTALLMENT PAYMENT |
TESTED ET APPROVED |
SATISFACTION GUARANTEED |
Discover a 2 in 1 carburetor kit specially designed for the YAMAHA VIRAGO 125 and 250.
This allows you to move on to a carburetor and move it to 90 degrees.
New version September 2023: the kit now has nozzles and a black tulip with grid.
This product is ideal for preparation bobber Or chopper.
The kit consists of the following elements:
- 2 in 1 stainless steel pipe
- 3 sleeves with 6 collars
- PE28 type carburetor
- A black tulip with 50 MM grid
- A batch of main jets from 75 to 98
- A set of secondary sprinklers from 32 to 55
There pipe is planned for this carburetor type PE 28 which is suitable for Virago 125 & 250.
It will, of course, be necessary adjust the carburetor to suit your motorcycle with the appropriate sprinklers.
The setting depends on your engine capacity and your preparation (exhaust, air filter, ignition, etc.).
If in doubt, call a professional for installation.
This product is not intended to increase the performance of the motorcycle. The objective is aesthetic.
Examples of installation on Christophe’s Virago:
On Julien's project: