Is the license plate compulsory?

Yes, the license plate is OBLIGATORY For all terrestrial vehicles with motor in circulation on public roads.

The license plate is used for Identify the vehicle And allows authorities to follow owners and vehicle users.

License plates are generally issued by government agencies responsible for vehicle management, such as interior ministries or services of the road traffic.

It is important to note that the license plates must be regularly renewed and must be readable and in good condition to be valid.

Where should we fix the license plate?

The license plate must be fixed on the rear part of the motorcycle, generally on the saddle or on a specific support provided for this purpose.

It is important to ensure that the license plate is clearly visible and readable at all times, and that the fixings are safe and in accordance with the safety standards in force.

It is also important to verify that the license plate is set in accordance with the laws and regulations in force in the country or the region where you drive.

You must also comply with the dimensions required for the license plate and the recommended motorcycle plate holder.

What does the laws in Europe say on motorcycle license plates?

Laws on motorcycle license plates in Europe vary from country to country.

However, in general, laws require motorcycles be registered with the competent authorities and that they carry a license plate valid at any time when used on public roads.

Registration plates must generally be fixed at the rear of the motorcycle, be readable (clean and equipped with lighting) and in good condition, and must comply with dimensions of dimensions and format established by the authorities.

It is important to note that certain regions of Europe have additional requirements for license plates, such as the use of a background reflective or the presence of lighting to light the license plate at night.

It is therefore important to inquire about the laws in force in each country or region before to travel in Europe with a motorcycle.

How to fix the motorcycle plate support?

There are several ways to fix the motorcycle plate support, but here are the general steps to fix the license plate support on a motorcycle (the fixing of the motorcycle side plate support may be different depending on your model, ditto for the support of short plate as well as for the plate support with lights which will require an electrical connection):

1. Make sure you have them good tools To install your license plate. You will need suitable screws, rivets or bolts as well as your license plate.
2. Fix the support firmly at the back of the motorcycle then place the license plate on the support, ensuring that it is aligned and that she is legible.
3. Use adequate rivets To fix the license plate on your motorcycle. It is important to tighten the screws or bolts correctly to the support to prevent the license plate from detaching when you run.
4. Check that the license plate is well -fixed And that she does not move. Also make sure that screws or bolts do not bother the operation of your motorcycle.

It is important to Respect standards of dimension and format of the license plate defined by the authorities and to verify that the fixings comply with the safety standards in force to avoid problems during road checks.

It is recommended to consult the user manual of your motorcycle to find out the required dimensions for the license plate and the recommended fixings.

What rivet for the motorcycle license plate?

There are different types of rivets that can be used to set a license plate Motorcycle.

Plastic or nylon rivets are generally the most commonly used because they are light and weather resistant.

Some manufacturers offer stainless steel rivets for a best resistance to corrosion.

Generally they must be white color and fix in the white background of the plate so that it does not alter the readability of the number.

How to place a plexi license plate?

Here are the general steps To place a plexiglass license plate on a motorcycle:

1. Make sure you have the right tools to install your license plate. You will need a drill as well as scrap wrath good diameter (rivet diameter). Of the rivets screws and your plexiglass license plate. A marker.
2. Place the plexiglass license plate on the rear plate support of your motorcycle, ensuring that it is well aligned and that it is readable. Using the marker make the bearings drilling on the back of the plate.
3. Drill the license plate by the back of it! This allows you to have a best finish.
4. Use the rivets to fix the plexiglass license plate on your approved motorcycle plate support to check that the plate is correctly fixed On the support to prevent the license plate from coming off when you run.

It is important to respect the standards of dimension and format of the license plate.

You can now choose the custom motorcycle plate support of your choice to make this appendix melted in the style of your customization: