Motorcycle counter

Is the counter compulsory on a motorcycle?

There are different legal requirements in terms of motorcycle equipment depending on countries and regions.

In some countries it is OBLIGATORY For motorcycles to be equipped with a functional speed counter to comply with the standards of road safety.

In other countries, it is not compulsory, but it is highly recommended for driver's safety.

It is therefore important to verify local laws and regulations to find out if a speed GPS motorcycle counter is compulsory.

What is the turn account for a motorcycle for?

The Moto Tours accounts is used to measure rotation speed engine. It can be associated with a digital motorcycle counter.

It usually displays speed in turns per minute (rpm). This information is important for the driver because it allows him to know what Régime the engine Currently works and ensure that it does not exceed the recommended speed limit to avoid engine damage.

The tour counter also allows the driver to better use the performance of his motorcycle, indicating the moment when it is best to change speed to obtain an acceleration optimal.

It can also be used to adjust carburetors or electronic injection.

How to connect a universal motorcycle counter?

The connection of a universal motorcycle counter will depend on the specific model you use, but here are the general steps you should follow:

1. Before you start, make sure you have all The necessary tools and accessories, such as electric cables, connectors and tightening necklaces.
2. Remove the front cover to have access to the original meter.
3. Remove the original counter in disconnecting electrical connectors and by loosening the fixing screws.
4. Install the universal meter by fixing it securely using the fixing screws provided.
5. Connect the wires of the universal counter to the corresponding connectors to the engine. The colors of the threads can vary depending on the model, it is therefore important to check the user manual to find out which wire goes where.
6. Attach the electric cables in place with tightening collars to avoid any movement.
7. Test the counter To make sure it works properly.
8. Return the front cover in place.

It is important to note that the connection of a universal counter can be complex (calibration also) and require electrical knowledge, it is therefore preferable to ask for the help of an experienced mechanic if you are not sure of YOU. It is also important to verify local laws and regulations to know if the use of a universal counter is authorized on your motorcycle (for example you must respect the values ​​of the original odometer, that is to say To say that the new counter must display the total mileage of the motorcycle).

How to calibrate a universal motorcycle counter?

The calibration of a universal motorcycle counter will depend on the specific model you use, but here are the general steps you should follow:

1. Find a place flat and clear To do the calibration.
2. Turn on the engine and let it idle for a few minutes to reach its normal operating temperature.
3. Use a GPS or an application speed tracking to measure the motorcycle movement speed.
4. Compare the measured speed by GPS/application with the speed indicated by the universal counter.
5. If the speed measured by the GPS/Application is different from that indicated by the universal counter, you will have to make adjustments To calibrate the counter.
6. To calibrate the counter, you will need to use the adjustment buttons (if they are present) to adjust the speed indicated for it to correspond to that measured by the GPS/Application.
7. Repeat steps 3 to 6 At different speeds to make sure that the counter is properly calibrated at different diets.
8. Check the speed indicated by the counter again after making adjustments to make sure it is properly calibrated.

What are the different types of universal motorcycle counter?

There are several types of universal motorcycle meters, each with its own characteristics and functionalities. The most common types include:

• Speed ​​counter: It displays the current motorcycle speed in kilometers/hour or miles/hour.

• Total kilometric counter: It displays the total distance traveled by the motorcycle since its acquisition.

• Daily kilometric counter: It displays the distance traveled by the motorcycle for a given day.

• Tachymeter: Or motorcycle turn, it displays the speed of rotation of the engine in towers/minute (rpm).

• Speed ​​report indicator: It indicates the speed report currently selected on the gearbox.

• Fuel gauge: It indicates the remaining fuel level in the motorcycle tank.

• Oil temperature indicator: It indicates the temperature of the engine oil.

• Distance counter traveled: It displays the distance traveled since the last reset.

• Fuel consumption counter: It displays instant or medium fuel consumption.

• GPS speed counter: It uses a GPS sensor to measure motorcycle speed, it is often more precise than conventional speed meters. There are also wireless GPS meters at least you will still have to supply it and connect the different information (flashing signal, engine oil light, etc.).

These meters are often with needle, however, we also have digital motorcycle meters and the mix of the two in order to combine the vintage look with technology. For more looks and discretion, you can mount a mini motorcycle counter but beware of the detriment of readability.

We offer a wide choice of vintage motorcycle counter, choose the perfect model to your machine!