Commodo Buell XB Rem 2.0 HD

WANT TO REJUVENATE THE DRIVING POSITION OF YOUR BUELL? 

Here are the new commodos REM 2.0 HD developed by REMMOTORCYCLE.

We returned our commodos “Plug and play” for your Buell. Assembly will only take you a few minutes!

So you will benefit from the way indicators Harley-Davidson with the comfort of push buttons.

The pair is sold with the module Flash relay ofAxel Joost. You can choose the operating mode based on your preferences.

Why change the controls?

The original commodos are often ugly, bulky and materials low quality, few manufacturers offer beautifully crafted controls.

Examples of installing REM 2.0 HD controls on a BUELL XB:

What are the functions of the REM 2.0 HD switches for Buell XB?

The left commodo, also called motorcycle flashing switch is composed as follows: 

• A button for the horn
• A switch to turn on the high beams
• One button for the left turn signal. 

And on the rear part, a additional button is installed and can be used for headlight calls (reset type button) 

The simplified motorcycle switch on the right is composed of:

• A start button
• One button for the right turn signal
• A circuit breaker switch

And on the back part, A additional button is installed and can be used for counter for example (reset type button). 

The design of REM 2.0 HD switches for Buell XB

This is a product of high tailoring. They are made in CNC aluminum 6061 carved from the mass.

THE commodos are installed on the handlebars 22mm (7/8") of the Buell.

No wires to install, buttons to solder, sheath to slide:

THE son are installed in a braided sheath and already has the connectors to install them directly on your BUELL.

How will I gain comfort?

Thanks to the module Axel Joost "Multi Flasher Relay" the indicators can stop automatically and a warning function is added.

• Quick press on the flashing button: 4 flashes and the flashing lights stop automatically.
• Press the flashing button for 0.5s to 1s: 30 Flashes and indicators stop automatically.
• Pressure greater than 1s, permanent lighting of the indicator.
• Pressing again turns off the indicator.
• Pressing the left and right flasher buttons at the same time activates the hazard lights (warning).

“Plug-and-Play” version for Buell XB, what exactly is it?

We offer you our REM 2.0 HD controls wired and equipped with original connectors. All you have to do is dismantle your old commodos. The connector sockets are located behind the protective screen. 

You can't go wrong for connection because the sockets are different.

Thanks to the module Flash Relay, you can remove your original flashing unit. So you can use LED turn signals without any problem.

Dimensions in picture:

Note : Pre-order, available from September.

Installation example: