Motorcycle fire

Why change your fire?

There are several reasons why a motorcycle owner may want to change his rear light:

• Security : Damaged or defective rear light may not work properly, which can increase the risk of accidents.

• Aesthetic : A new rear light can improve the general appearance of the motorcycle and give it a more modern look or to customize with a vintage rear light.

• Visibility improvement : LED rear lights are generally brighter than traditional rear lights, which allows other drivers to better see the motorcycle.

• Sustainability : LED Motorcycle LED lights are generally more durable and have a longer lifespan than traditional rear lights, which reduces long -term maintenance costs.

• Personalization : Some people want to change their rear light for a specific model that corresponds to their personal style or that of their motorcycle.

What are the types of motorcycle rear lights?

There are several types of motorcycle rear lights, including:

• Incandescent rear lights : They use an incandescent bulb to produce light. They are inexpensive, but have a low light yield and consume a lot of energy.

• LED rear lights : They use electroluminescent diodes to produce light. They have a high light yield, low energy consumption and a long service life.

• Fluorescent tube rear lights : They use fluorescent tubes to produce light. They have a high light yield and low energy consumption, but have a shorter lifespan than LED lights.

• LED rear lights : They use electroluminescent diodes to produce light, they have a high light yield, low energy consumption and a long service life.

There are also dynamic rear lights for motorcycles that have special light effects, such as LED strips that flash or change color.

How to choose the rear light type?

There are several factors to consider when you choose a LED motorcycle back light for your motorcycle:

• Light : LED rear lights generally have a higher light yield than incandescent fires, making them more visible for other drivers.

• Energy consumption : LED rear lights generally have lower energy consumption than incandescent fires, which can prolong the autonomy of your battery.

• Lifetime : LED rear lights generally have a longer lifespan than incandescent fires, which means that they require fewer replacements.

• Cost : LED rear lights are generally more expensive than incandescent fires, but they tend to have a better light yield, lower energy consumption and a longer lifespan.

• Aesthetic : There are different styles of rear lights for motorcycles, choose the one that best suits the aesthetics of your motorcycle.

• Efficiency : Some LED rear lights have special light effects, such as LED strips that flash or change color, so they are more visible.

It is important to note that the LED rear lights are generally more efficient and more durable than incandescent lights, however it is important to check that the rear light chosen is approved for your country and for road use. It is recommended to consult the user manual or ask for advice from a professional for specific choices.

How to connect fire motorcycle?

There are several ways to connect a rear light for motorcycle, but here are the general steps to connect a rear LED light:

1. Make sure that the motor of your motorcycle is turned off and the contact key is removed.
2. Locate the electric wires corresponding to the rear light of your motorcycle. There will generally be a red wire for positive power (+) and a black wire for the negative mass (-).
3. Connect the red wire from the rear light to the positive power (+) using a crimping connector or a connection cable.
4. Connect the black wire from the rear light to the negative mass (-) using a crimp connector or a connection cable.
5. Make sure all the connections are tight and in place, then turn on the engine of your motorcycle to check that the rear light works properly.

It is important to note that the connection of a LED rear light can vary depending on the motorcycle model, it is therefore recommended to consult the user manual or to ask for advice from a professional for specific connections.

How to connect 3 -thread rear light fire?

It is possible that some motorcycle rear lights have only three wires to connect: a red wire for positive power (+), a black wire for the negative mass (-) and a green or white wire for the indicator. Here are the general steps to connect a rear light to 3 wires:

1. Make sure that the motor of your motorcycle is turned off and that the key contact is removed.
2. Locate the electric wires corresponding to the rear light of your motorcycle. There will generally be a red wire for positive power (+), a black wire for the negative mass (-) and a green or white wire for the flashing light.
3. Connect the red thread From the rear fire to the power supply Positive (+) Using a crimping connector or a connection cable.
4. Connect the black thread From the rear light to the mass Negative (-) Using a crimping connector or a connection cable.
5. Connect the wire Green Or white from the rear light to the corresponding wire for the hitchhiker of your motorcycle using a crimp connector or a connection cable.
6. Make sure all the connections are tight and in place, then turn on the engine of your motorcycle to check that the rear light and the stop work properly.

It is important to verify that the wires correspond well to the power supply, mass and flashing functions before connecting the rear light and check that all connections are tight For Avoid short circuits. It is recommended to consult the user manual or ask for advice from a professional for specific connections.

You can consult all our rear lights tested and appreciated by bikers: