Vintage motorcycle handlebar

Can we replace your vintage motorcycle handlebars?

Yes, it is generally possible to replace the Vintage motorcycle handlebar.

However, this may require certain modifications or adaptations to ensure that the new handlebar is suitable for the motorcycle model and operates properly. For example ensure that the cable and hose length will be sufficient.

Choosing a new handlebar can also affect the driving position And the style of the motorcycle, it is therefore important to think carefully about the type of handlebars you want before you replace it.

It is recommended to consult a professional mechanic or a specialist in vintage motorcycles to help you choose a new handlebars and install it correctly.

What are the types of vintage motorcycle handlebars?

There are several types of handlebars for vintage motorcycles, here are some examples:

• Flat handle : a straight and flat handlebar which offers a more sporty driving position.

• "Ape Hanger" handlebar : a high and curved handlebar to the rear which allows a more relaxed driving position.

• "Tracker" handlebar : a flat and wide handlebar which offers a more aggressive driving position. Often use on flat-track motorcycles.

• "Clubman" handlebar : A handpicked handlebar which offers a more leaning driving position.

• "Clip-on or bracelet" handlebar : a handlebar that is attached directly to the motorcycle fork tubes, for an even more sporty driving position.

• "Chopper" handlebar : a high and wide handlebar which offers a very relaxed driving position.

There are of course other types of vintage motorcycle handlebars, and each type offers a Different driving experience. It is important to choose a handlebar that is suitable for your driving style and that is compatible with your motorcycle.

How to choose your vintage motorcycle handlebars?

The choice of a vintage motorcycle handlebar depends on several factors, such as the desired driving style, the height and length of the handlebars, compatibility with the motorcycle model, and aesthetics. Here are some tips to help you choose the ideal handlebar for your vintage motorcycle:

• Determine your driving style : If you are looking for a more sporty driving position, a flat handlebars or a "clip-on" handlebars could be the ideal choice. If you are looking for a more relaxed position, an "APE HANGER" or "Chopper" handlebars would be more suitable.

• Take into account your morphology : The height and length of the handlebars must be adapted to your size and your posture for comfortable driving. A too high or too low handlebar can cause back or shoulder pain.

• Check the compatibility : The handlebars must be compatible with the motorcycle model and components such as cables, brakes, mirrors and switches. It is therefore important to check these elements before choosing a handlebars.

• Choose a handlebar that corresponds to theaesthetic From your vintage motorcycle: the handlebars must be in harmony with the entire design of the motorcycle.

• Try different handlebars: if possible, try different types of handlebars to determine the one that suits you best in terms of comfort and maneuverability.

By taking these factors into account, you can choose a handlebars that will improve your experience driving andappearance of your vintage motorcycle.

How to determine the diameter of the handlebars I need?

To determine the diameter of the handlebars you need for your vintage motorcycle, you can measure the outside diameter of the motorcycle fork for the handlebar where the handlebars must be installed (for bracelet standard handlebars).

You can also measure the diameter with a caliper At the level of the fixing pontet.

Most handlebars have a standard diameter of 7/8 inch (about 22 mm) Or 1 inch (about 25 mm). However, some models of vintage motorcycles can have different diameters.

It is therefore important to precisely measure the diameter of the fork tube to make sure you buy the right handlebars.

If you have difficulty in measure the diameter, you can also check the manual of the owner of your vintage motorcycle or consult a specialist in vintage motorcycles to help you identify the appropriate handlebar size.

It is important to make sure that the handlebar you buy is suitable for your vintage motorcycle to avoid any costly modification or adaptation.

How to change the vintage motorcycle handlebars?

The vintage motorcycle handlebar change process can vary depending on the motorcycle model and the handlebar type you want to install. However, here are some general steps that can help you replace the handlebars of your vintage motorcycle:

1. Remove the handles of handlebars and brake and clutch controls : Use a screwdriver to loosen the screws that fix the handles and handlebar controls. Gently remove them to avoid damaging cables or electrical wires.
2. Loosen the tightening necklaces : Use a key to loosen the tightening necklaces that keep the handlebars in place. Remove them completely.
3. Remove the old handlebars : Gently remove the old handlebars by sliding it out of the fork tube. Be careful not to damage the electric wires or the cables.
4. Install the new handlebars : drag the new handlebars into the fork tube. Make sure it is aligned correctly and that it is well fixed.
5. Tighten the tightening necklaces : tighten the tightening necklaces to keep the new handlebar in place. Make sure they are tight, but not too tight.
6. Reinstall the handles of handlebars and orders : Reinstall the handless handles and brake and clutch controls on the new handlebars. Tighten the screws to keep them in place.
7. Check operation : Once you have finished, check that all the commands work properly and that the new handlebars are well fixed by performing a driving test.

If you are not comfortable with the handlebar change process or if you do not have the necessary tools, it is recommended to entrust this task to a professional mechanic or a specialist in vintage motorcycles.

In conclusion, the handlebars is an important element of the Vintage motorcycle which can have a significant impact on the driving and appearance of the motorcycle.

There is Different types of handlebars For vintage motorcycle, each offering advantages and disadvantages.

To choose the right handlebars for your vintage motorcycle, you must take into account different factors, such as the driving style, there position desired driving and compatibility with your motorcycle.

The handlebar change process can vary depending on the motorcycle and the type of handlebars that you want to install, but it is important to ensure that you do the work properly to avoid any damage or security risk.

If in doubt, it is best to call on a professional mechanic or a specialist in vintage motorcycles to help you change the handlebars of your motorcycle.

Transform the appearance and sensation From your vintage motorcycle with our selection of high quality handlebars.

Find the perfect handlebars for Your driving style And add a personal touch to your classic motorcycle.