Long and raised scrambler rear buckle. 22 or 25 mm

• Make by hand
• Steel
  

Introducing the Long, Raised Scrambler Back Loop

If you want to install a saddle with raised rear or modify the shape of your motorcycle, this product is ideal. 

There loop is a part to be attached to the rear of the motorcycle to close the frame.

This makes the rear part of the motorcycle more aesthetic.

There scrambler rear buckle is carried out by hand in steel. The steel is untreated. It is available in diameter 22 Or 25 mm and in several different widths.

Please note the width is not measured at the center distance but the external width or the distance at its widest.

The model is available in widths: 175, 195, 205, 215, 225, 235 and 250 mm. 

There long and raised rear scrambler rear buckle is ideal if you want to install a flat saddle or modify a crooked frame with a more classic line.

There scrambler rear buckle is ideally installed by being welded to the original frame or buckle.

You can tighten the parts at the end to match your chassis.

We can make the loop longer if you wish (a supplement may be requested depending on the length to cover additional shipping costs).

Here is an illustration of a short loop:

The dimensions expressed correspond to the following dimensions:

Attention : The width expressed is the external width, distance between the ends of each side. 

Features:

• Material: steel 
• Color: Raw
• Diameter: 22mm/25mm 
• Length: +/- 55 cm 

Important :

The buckle is raw, it may have superficial rust. This does not prevent its proper use.