December 07, 2023
I bought a new pair of handlebars, I would like Install them myself?
Good news! Thanks to our installation tutorial, you can install your new pair of electric controls yourself step by step. A word of advice, take your time, be methodical.
Plug in commodos On a motorcycle depends on the motorcycle model and the commodos you use. Our installation tutorial is based on a basic installation.
First, check that you can reconnect All essential functions that you use on your new commodos.
Commodos are generally controlled control devices with handlebars, making it possible to control functions such as turn signals, THE headlights, THE horn, etc.
Material required:
Steps:
1- Battery disconnection
Before working on the motorcycle electrical system, disconnect the battery for Avoid short-circuit accidental.
Trick : Disconnect the negative terminal first. During the re connection of the battery plug the terminal - last.
2- Withdrawal of the old commodos
Remove them by unscrewing the screws and removing the Electrical connectors On the electric bundle of the motorcycle.
3- Identification of buttons
You must make sure to keep the same type of button to reproduce the same function (pulse, self -locking 2 positions Or 3 positions).
You can also use an additional module to use other types of buttons. For example our module Relay Flash d 'Axel Joost Allows you to use pulse buttons.
This module records your request and the program in a defined time (ex: short pressure = 3 seconds of walking, long pressure = 10 seconds of walking)
Example of the types of buttons that are generally found on motorcycles:
A function (ex: horn):
On - OFF (2 -position impulse, two wires)
The principle of the pulse button: I press and then release, the button comes back in the initial position.
Breakfast:
On - OFF (Self -locking 2 positions, two wires)
The principle of self-blocker operating: I press I release, the button remains in the Pressing position. I press I release again in order to return to the initial position.
Two functions:
Left turn signal - Right turn signal
On - off - we (Self -locking 3 positions, three wires) The off being the "common" for the two functions assigned on the switch.
4- Electric diagram (option ++)
You can find on the internet electrical diagram of your motorcycle.
This will require a little reading exercise but We can help you in the event of a problem.
This Option ++ You will facilitate in understanding the colors of electric wires for the various switches.
5- Identification of wire colors
Identify the cables of Original commodos motorcycle.
The colors of the threads can vary from one motorcycle to another, but certain conventions generally exist.
For example, green or yellow are often used for turn signals, blue for highlights, white for Cross -country lights, etc. Use a multimeter In order to determine the contacts:
Use of the multimeter in video
Use this type of table for Note the color of the wires Depending on the different switches:
Use the original commodo column in order to note The color of the wires in front of each function.
6- Connection of new commodos
Associate cables With the new commodos. THE Remm commodos are supplied with the wiring in order to easily identify the different functions.
If you want to keep your original bundle of original then we recommend that you Recover the socomodos of original commodos.
To this cut the sons of the commodos by taking margin in order to nake And connect The new commodos.
To properly connect the electrical wires between them, you can either weld them to the tin then protect them with a Thermorettable sheath or a solution 2 in 1 consists in using Sweet :
THE welding sleeves are ideal for those who do not know how to weld or simply for people who want save time.
Indeed, you just have to place the two naked wires in the sheath and then heat Using a thermal shift to Weld and retract the sheath.
7- Test
Once the connections have been made, Restore food battery and test the commodos.
Check that the indicators, the lights and other functions are operational.
8- Fixing of Commodos
Once everything works properly, fix The new commodos on the handlebars.
9- cable protection
Make sure protect cables against friction and external elements by fixing them correctly and using insulating ducts if necessary.
Also use Plastic necklaces (rilsan) in order to properly attach your electric bundles along the handlebars and chassis.
Braque your handlebars in a right and left stop to check that there is no tension at the level of the electrical wires.
10- Final verification
Make a last test To make sure everything is working properly.
Note :
If you do not feel comfortable doing it yourself, it is recommended to use a professional or to a Motorcycle mechanic.
Motorcycles can have complex electrical systems, and errors in the wiring can cause operating problems.
Remmotorcycle support you in your projects, which is why you can count on Our technical support To help you in the event of a problem.
In order to facilitate the installation of motorcycles, we offer versions Plug & Play. These versions have original connectors. You just have to disconnect And reconnect The electrical controls of your motorcycle.
You do not find your motorcycle in plug and play version in this > List < ? Contact us > here < !
We are also able to make you custom conveniences with predefined functions.
This article helped you Easily plug in motorcycle commodos ? Tell us in the comments.
The comments are approved before their publication.
SIGN UP to get the Latest on Sales, New Releases and More…