Motorcycle shock absorber

Why change your motorcycle rear shock absorbers?

There are several reasons why you might want to change the rear shock absorbers of your motorcycle:

• Wear : Shock absorbers can wear out over time, which can cause performance and safety. If you notice that your motorcycle cars or the rear wheel bounces excessively, it may be time to change your shock absorbers.

• Performance : High quality shock absorbers can considerably improve the stability and comfort of driving of your motorcycle. If you are trying to improve the performance of your motorcycle, changing the AR Moto shock absorber can be a good idea.

• Personalization : You can also change your shock absorbers for models more suited to your driving style or your personal preferences.

• Damaged : Rear shock absorbers can be damaged following an accident or excessive use, so it may be necessary to replace them to ensure the safety and performance of your motorcycle.

It is important to note that it is always preferable to consult a professional mechanic to check the condition of your shock absorbers and advise you on the best option on motorcycle models. There are also reconditioning solutions, mainly on the highest -end models.

What types of motorcycle shock absorber is there?

There are mainly two types of motorcycle shock absorber: spring shock absorbers and gas shock absorbers.

• Spring shock absorbers : Spring shock absorbers are the most common and the oldest. They use a metal spring to absorb the vibrations and shocks of the road. Spring shock absorbers can be set to adapt to different types of driving and loads.

• Gas shock absorbers : Gas shock absorbers use fluid, generally oil or compressed air, to absorb vibrations and road shocks. Gas shock absorbers tend to be lighter and more durable than spring shock absorbers. They can also be set to adapt to different types of driving and loads.

There are also shock absorbers semi-active And assets, which use sensors and algorithms To automatically adjust according to driving conditions. These shock absorbers are generally used on high -end and sports motorcycles.

What are the risks of riding with HS shock absorbers?

Rolling with poor condition shock absorbers can cause many safety and performance problems:

• Stability : Low -condition shock absorbers can cause a lack of stability when you run, which can cause sudden and unforeseen movements of the motorcycle. This may increase the risk of falling or collision.

• Driving comfort : Low -condition shock absorbers can cause unpleasant vibrations and shades when you run, which can make driving less comfortable and tiring.

• Premature wear : Poor condition shock absorbers can cause premature wear of tires, bearings and other components of the motorcycle.

• Performance : Low -condition shock absorbers can lead to a loss of motorcycle performance, especially with regard to handling, handling and adhesion.

• Security : Low -condition shock absorbers can increase the risk of accidents, especially when driving on damaged roads or in difficult conditions.

It is important to do revise regularly The shock absorbers of your motorcycle to make sure they are working properly. Replace damaged or worn shock absorbers to ensure the security and performance of your motorcycle. If your shock absorber is too crushed then do not use a motorcycle shifting up to fill this failure.

How do I know if my shock absorbers are to be replaced?

There are several signs that may indicate that your motorcycle shock absorbers are to be replaced:

• Excessive twist : If the rear wheel of your motorcycle bounces excessively when you drive on damaged or irregular roads, this may indicate that your shock absorbers no longer work effectively.

• Pitch : If your bike or oscillates when you run, it may also indicate that your shock absorbers are worn or damaged.

• Suspicious noise : Suspicious noises such as grinks or clicks may indicate problems with shock absorbers.

• Visual state : Check the visual condition of your shock absorbers, if there are oil leaks, cracks, rust or poor general condition, this may mean that it is time to replace them.

• Age : Shock absorbers have a limited lifespan, generally 40,000 to 60,000 km, it is therefore important to replace them regularly, even if they do not have visible signs of deterioration.

It is recommended to consult a professional mechanic to check the condition of your shock absorbers. So advise you on the best option for your motorcycle. It can make you a precise diagnosis and tell you if you should replace them or if they can be repaired.

How to choose your new shock absorbers?

There are several factors to take into account when you choose new shock absorbers for your motorcycle:

• Quality : Make sure you choose high quality shock absorbers made by recognized brands. It is preferable to favor shock absorbers who have received positive opinions and have a good reputation.

• Kind : As mentioned above, there are two types of shock absorbers for motorcycles: spring shock absorbers and gas shock absorbers. The gas shock absorbers are generally more expensive, but more durable and lighter than spring shock absorbers.

• Adaptability : Make sure that new shock absorbers are compatible with your motorcycle, especially in terms of size and mounting. It is also important to check whether the shock absorbers have adjustment options to adapt to different types of driving and loads.

• Use : If you mainly use your motorcycle for short journeys or for walks, you will need different shock absorbers only if you mainly use your motorcycle for long journeys or for races. It is therefore important to choose shock absorbers adapted to your main use.

• Budget : High quality shock absorbers can be expensive, so it is important to define a budget and choose shock absorbers that meet your needs and requirements while staying in your budget.

It is important to consult a professional mechanic to help you choose the best shock absorbers for your motorcycle. He can advise you on the available options and help you make the best choice according to your needs and your budget.

What is the best motorcycle shock absorber?

There is no better motorcycle shock absorber that is suitable for all types of motorcycles or all types of drivers.

The shock absorbers that are best suited to your motorcycle depend on your preferences personal, of your budget and the use you make of it. Here are the "best suspensions":

For racing use, major brands offer products very efficient, nevertheless you will have to adjust them regularly depending on the layout and other multiple settings.

Motorcycle rear suspensions can be electric and thus always offer the best setting in all situations. However, this type of suspension is very expensive and present only on motorcycles of large displacements high -end. Few manufacturers offer this type of suspension.

It is important to note that high -end shock absorbers can be more expensive, but they are generally more durable and offer better performance than affordable shock absorbers.

It is therefore important to consult a professional mechanic to help you choose the best shock absorbers for your motorcycle according to your needs and your budget.

How to change a motorcycle shock absorber?

The mounting of the rear adaptable motorcycle shock absorber can vary depending on the type of motorcycle and the shock absorbers you use, so it is important to follow the instructions provided with the shock absorbers.

Here is a general overview of the mounting stages of the rear shock absorbers:

1. Preparation : Before you start, make sure you have all the necessary equipment and work in a clean and well-lit place. It is also advisable to lift the motorcycle on a support for wheels to facilitate access to rear shock absorbers.
2. Withdrawal of old shock absorbers : Remove the fixing bolts from the existing rear shock absorbers. It may be necessary to loosen the brake line fasteners to remove the shock absorbers.
3. Mounting new shock absorbers : Place the new shock absorbers in position and fix them in place using the fixing bolts provided. It is important to tighten the bolts with the recommended tension to avoid any game or unwanted movement.
4. Shock absorber adjustment : Adjust the shock absorbers according to the instructions provided with the shock absorbers. If the shock absorbers are adjustable, it is important to adjust them to adapt to your driving style and your weight.
5. Verification : Once the shock absorbers are mounted, check that all the bolts are tight and that the shock absorbers are well aligned. Take a driving test to check the operation of the shock absorbers.

It is important to note that the assembly of rear shock absorbers requires specific tools and a certain experience in mechanics. It is therefore recommended to consult a professional mechanic if you are not sure how to correctly install the shock absorbers of your motorcycle.

How to adjust a motorcycle rear shock absorber?

The adjustment of motorcycle rear shock absorbers can vary depending on the type of motorcycle and the shock absorber model you use, so it is important to follow the instructions provided with the shock absorbers. Here is a general overview of the adjustment steps for the rear shock absorbers:

1. Preparation : Make sure you have all the necessary equipment and work in a clean and well-lit place. It is also advisable to lift the motorcycle on a support for wheels to facilitate access to rear shock absorbers.
2. Preload rule : Preload is the initial voltage that is applied to the spring of a shock absorber. It is important to adjust the preload to adapt to your weight and your use of the motorcycle. You will need a motorcycle shock absorber key.
3. Relaxation rule : Relaxation is the speed at which the shock absorber returns to its starting position after being compressed. It is important to adjust the relaxation to adapt to your driving style.
4. Compression rule : Compression is the speed at which the shock absorber absorbs shocks and vibrations. It is important to adjust compression to adapt to your use of the motorcycle and your driving preferences.
5. Verification : Once the settings are made, check that the shock absorbers are well aligned and that there is no game or unwanted movement. Take a driving test to check the operation of the shock absorbers.

It is important to note that the adjustment of shock absorbers can be complex and require specific tools.

How to harden a motorcycle shock absorber?

There are several ways to harden the shock absorbers of your motorcycle but be careful not to proceed in the event of real need:

1. Preload adjustment : Preload is the initial voltage that is applied to the spring of a shock absorber. By increasing the preload, you can harden the shock absorber. Some shock absorbers have a preload adjustment wheel on the spring, others have a adjustment nut which can be turned by hand or with a key.
2. Compression adjustment : Compression is the speed at which the shock absorber absorbs shocks and vibrations. By increasing compression, you can harden the shock absorber. Certain shock absorbers have a compression adjustment nut on the body of the shock absorber, others have a click system to adjust compression.
3. Use of harder springs : If you want a firmer damping, you can replace the original springs with harder springs. It is important to choose springs that suit your weight and use of the motorcycle.
4. Use of thicker compression oil : If you want a firmer damping, you can replace the original compression oil with a thicker oil. It is important to choose an oil that suits your shock absorber and your use of the motorcycle.

It is important to note that harden the shock absorbers can cause loss of driving and traction comfort, so it is important to adjust the shock absorbers according to your personal preferences and the use of your motorcycle. It is also advisable to consult a professional mechanic to help you pay the shock absorbers on your motorcycle.

How to inflate a motorcycle shock absorber?

To inflate a motorcycle shock absorber, you will need an air pump suitable for the required pressure for your shock absorber. You can use a high pressure pump For bicycle. You will also need to make sure that the shock absorber is dismantled from the motorcycle before inflating it.

1. Find the shocking valve.
2. Use the pump (never use air compressor under penalty of damaging the seals) to add air to the shock absorber until the required pressure be reached. The required pressure is generally indicated on the shock absorber or in the manual of the owner of the motorcycle.
3. Check the pressure using a pressure gauge to make sure it is correct.
4. Go up the shock absorber on the motorcycle.

It is important to note that shock absorbers have specific pressures and it is important to Respect these pressures To avoid damage to the shock absorber. It is also recommended to consult the manual of your motorcycle for specific instructions on how to properly inflate the shock absorber.

In summary, the choice of Motorcycle shock absorbers will depend on several factors such as your driving style, your personal preferences and the model of your motorcycle.

Discover our selection of shock absorber to customize your bike: