REMMOTORCYCLE FLOOD MISTING MONTAINING

Installation, assembly of remmotorcycle motorcycle floating discs

Difficulty level:

2/5 (easy)

Necessary material:

Flat screwdriver or beak pliers

Kit contained:

- 1 floating disc (track)

- 1 floating disc door

- 6 floating rivets

- 6 flat washers

- 6 springs

- 6 clips (e-clip)

COMPOSITION Kit Floating REM

Step 1

Important : The washers and clips are always located inside the wheel (interior of the disc).

Work flat on a table or workbench

Step 2

Identify the installation direction as a function of disc support and floating rivets

Step 3

Insert all floating rivets:

Motorcycle floating disc rivet

Step 4

Place the flat rings first

Motorcycle floating rivets

Motorcycle floating disk washer

Step 5

Position the springs on the flat rings

Motorcycle floating disc rivet

Step 6

Log the floating rivets using e-clips. Use a flat screw rotation and push behind the e-clip. You can use a beak pliers for easier.

Make sure the clip revolves around the rivet. This means that the e-clip is in place.

Repeat for all rivets.

Motorcycle floating rivets

Admire!

Remmotorcycle custom floating disk

Important note: When installing the disc on your hub, remember to tighten the screws with net brake and tighten the screws to the manufacturer's torque.

REMMOTORCYCLE FLOOD MISTING MONTAINING

Installation, assembly of remmotorcycle motorcycle floating discs

Subcribe