DB Killer Universal Motorcycle Angled Baffle Size 48 mm

Reduce NOISE with our Motorcycle Baffle

Theremotorcycle chicane is also called "DBkiller", which literally means "decibel killer". This "kills the noise" of the exhaust.

What is a DB killer chicane?

A motorcycle baffle is a product used toreduce exhaust sound.

This is generally a long perforated tube which extends along the flow path of exhaust gas. The exhaust gases pass through it, where the exhaust noise is attenuated due to the narrowing of the trajectory.

Why install or replace a baffle on a silencer?

The purpose of the baffle is to reduce noise to acceptable limits of decibelswhich will be comfortable for your ears and those of law enforcement.

From one point of view legal, the decibels produced by a motorcycle must match the original information of the motorcycle. Information available on the registration document and on the vehicle manufacturer's plate.

In addition, since 2019, new radars latest generations are being tested to penalize motorcyclists for “excessive noise”. A new tax greater than the cost of DB Killer chicane.

It is the same with certain roads which are now prohibited for certain motorcycles because they are too noisy...

Does installing a chicane impact the performance of the motorcycle?

The exhausts installed as standard have motorcycle chicanes Or DBkiller pre-installed and are designed to reduce the sound of exhaust gases, which also helps create back pressure on the valves, which also increases volumetric efficiency of engines. 

Thus, according to manufacturers, the use of non-standard exhausts also reduces the lifespan of engines..… Hence the additional benefit of using a motorcycle chicane.

How to adjust the sound of the motorcycle chicane?

Our exhaust baffles motorcycle have the particularity of having a removable part at the end of the chicane. This removable part allows you to best adjust the sound volume you want to have on your motorcycle.

It should be noted that the two screws BTR type supplied with the chicane screw onto the baffle. For a motorcycle that tends to vibrate a lot, we recommend that you add a brake nut to ensure you do not lose the removable part as well as the motorcycle baffle.

How to choose a baffle?

The diameter, expressed in millimeters, represents the outer diameter, this must be less than the inner diameter of your exhaust. This means that if your exhaust has an internal diameter of 36 mm, you must choose the 35 mm model.

For the exhausts For intermediate dimensions, we advise you to use the smaller size. Exhaust gases will no longer be able to escape but this will still reduce the noise.That is to say, if your exhaust has an internal diameter of 52 mm, you must choose model 48mm.

Features :

1. Color: Gray or Black following arrival
2. External diameter: 48 mm
3. Thread size: 6mm/M6
4. Length 140mm (can be cut)
5. Angle of 45°

How to install the motorcycle chicane?

There motorcycle chicane installs in the silencer.

You must check the outlet diameter of your exhaust silencer at the place where the baffle will be fixed in order to know the diameter that you can choose:

There is a tolerance of 2mm.

So for the 58 mm model is intended for the 57-58 mm models.

Note : Available within 7-11 days