Motorcycle handle

Why change your motorcycle handles?

There are several reasons why a motorcycle driver might want to change his handles. Some of the most common reasons include:

• Wear : Rubber handles can wear out over time, becoming smooth and slippery, which can make driving dangerous.

• Comfort : More comfortable handles can help reduce the fatigue of the hands and wrists during long journeys.

• Style : Motorcycle handles can be personalized to match the aesthetics of the motorcycle.

• Performance improvement : Some types of handles may provide better take for more sporty driving.

• Adaptation to your needs : There are motorcycle handles adapted to the needs of people with reduced mobility.

In general, it is important to ensure that the handles of the motorcycle are in good condition and comfortable to ensure safe and pleasant driving.

How to choose motorcycle handles?

There are several factors to take into account when choosing motorcycle handles. Here are some elements to consider:

• Material : Motorcycle handles can be made of rubber, foam, gel or metal. Each of these materials has its own advantages and disadvantages.

• Comfort : Try handles before buying them to make sure they are comfortable for your hands and wrists.

• Size : Make sure that the handles are the right size for your hands and that they can be adjusted to adapt to you.

• Grip : Rubber or foam handles can offer better grip than metal handles.

• Resistance : Metal handles can be more resistant than rubber or foam handles, but can be heavier.

• Design : There are motorcycle handles from different designs, so choose the one that harmonizes the best with the look of your motorcycle.

• Adaptation to your needs : There are motorcycle handles adapted to the needs of people with reduced mobility.

It is important to note that for certain motorcycle models, specific handles are needed and it is important to check compatibility before purchase.

What are the handle types?

There are several types of motorcycle handles, each with different characteristics and advantages. Here are some current examples:

• Rubber handles : Rubber handles are the most common and most affordable. They are flexible, comfortable and offer good grip. However, they can wear out faster than other materials.

• Foam handles : Foam handles are similar to rubber handles, but can offer better shock absorption. However, they can be less resistant to water and wear.

• Gel handles : Gel handles are more expensive than rubber or foam handles, but offer excellent comfort and better absorption of vibrations.

• Metal handles : Metal handles are more resistant and durable than rubber or foam handles, but can be heavier and less comfortable.

• Ergonomic handles : These handles are designed to adapt to the shape of the hands and wrists for better comfort and better socket.

• Heated handles : These handles are equipped with a heating system to warm the driver's hands in winter.

• Adjustable handles : These handles make it possible to adjust the angle and the height to adapt to the individual needs of each driver.

• Motorcycle passenger handle : They allow the passenger (in French SDS "Sand Sand") to cling to the motorcycle firmly in order to fight against acceleration and braking. The SDS can also hang on thanks to the optional motorcycle tank handle.

• Leather handle : For your custom, they are ideal as vintage motorcycle handle.

It is important to choose handles that are suitable for your driving style and your needs for safe and comfortable driving.

How to remove the old handle?

To remove the old motorcycle handles, you will need basic tools such as a screwdriver, a cutter, a compressor and a blower. Here are the steps to follow:

1. Unscrew the handle fixing screw using a screwdriver. Some handles may also require. For rubber handles if you change them because they are worn then you can cut out thanks to the cutter. If you want to keep your old handles then using a compressor and a blower, you can slightly take off the handle and send pressure from the handlebars and the handle. This will take off and thanks to the air flow you can remove the handle without forcing.
2. If step 1 is a failure then try with a Flat screw To get him out.
3. Once the handless handle has been removed, also remove the tip from the handle which is inside the handlebars.
4. Repeat the procedure for the other handle.

It is important to note that some vehicles may require different steps to remove the handles. It is therefore important to refer to the user manual for your motorcycle for specific instructions.

If you are not comfortable to remove your own motorcycle handle, it is best to call on a professional to avoid causing damage to your motorcycle.

How to install the new motorcycle handle?

To install new motorcycle handles, you will need the tools you have used to remove the old handles and possibly soapy water. Here are the steps to follow:

1. Make sure that the new handles are clean and free of fat or oil.
2. Place the tip of the handle inside the handlebars.
3. Slide the new handle on the tip of the handle, pushing it towards the inside of the handlebars. You can for rubber handles wet the inside Handle with soapy water. By drying the handle will no longer move.
4. Screw the fixing screw of the handle in place. Make sure the handle is tight, but not too tight to avoid damaging it.
5. Repeat the procedure for the other handle.
6. Check that the handles are well fixed and that theyfreely Before driving.

It is important to check the handling of the handles to ensure that you follow the appropriate steps and check if the handles are compatible with your motorcycle model. It is also important to ensure that the handles are tight to avoid any risk of disassembly during driving.

How to install an accelerator handle?

The installation of an accelerator handle on a motorcycle can vary depending on the motorcycle model and the accelerator handle you use. Here are the general steps to follow to install an accelerator handle:

1. Remove the old accelerator motorcycle handle by unscrewing The fixing screws And pulling the handle outwards.
2. Place the new accelerator motorcycle handle on the accelerator shaft and make sure it is aligned.
3. Screw the fixing screws in place and tighten them firmly to keep the handle in place.
4. Test the accelerator to make sure it works properly and does not block. This step is very important. Your handle must come back freely. Otherwise this could cause an accident.

Refer to the assembly instructions for the accelerator handle to make sure you use the right tools and follow the appropriate steps.

Check if the accelerator motorcycle handle is compatible With your motorcycle model and check if the fixing screws are tight to avoid any risk of disassembly during driving.

It is also important to check if the accelerator handle is set so that there is no game, and that it is well within your reach and comfortable for you. It is advisable to do a road test to check that everything is working properly after installation.

What is an accelerator handle fast draw?

A rapid draw accelerator is a type of accelerator that allows you to adjust the sensitivity accelerator so more precise And faster.

It is generally used for racing motorcycles, sports motorcycles and hiking motorcycles high -end. It is often installed instead of the standard accelerator and allows you to adjust the sensitivity of the accelerator by turning a wheel or by activating a lever.

It makes it possible to respond more quickly to speed changes and to drive more effectively.

This can also improve performance from the engine by allowing the pilot to maintain a more constant speed during the turns. It is generally associated with a specific accelerator handle for effective use.

Here is our product selection to help you find the model of your choice: