Motorcycle signal lights or turn signals are lights installed on motorcycles to signal changes of direction and overtaking maneuvers. On the preparations, they are generally replaced for more aesthetic and efficient products. Replacement with LED turn signals is used to increase visibility and safety on the road .
Are motorcycle indicators mandatory?
Yes, indicators are mandatory on a motorcycle in most countries. Turn signals are used to signal changes of direction and overtaking manoeuvres, increasing visibility and safety on the road. They are considered mandatory safety equipment and it is illegal to ride without them.
In France, it is indeed mandatory to have traffic lights (approved motorcycle flashing) at the front and at the rear of a motorcycle. Motorcycle indicators must be orange and homologated . If you drive without a turn signal, you risk a fine and deduction points on your driver's license.
It is therefore important to ensure that your motorcycle's turn signals are in good working order and to use them correctly while respecting traffic rules to avoid any risk of accident and traffic violation.
What does the regulation of motorcycle led turn signals say?
In general, LED motorcycle turn signals must meet the road safety standards and regulations in force in each country. It is important to check whether the LED signal lights you want to use comply with the standards and regulations in force before installing them on your motorcycle.
In France it is compulsory for the color of the traffic lights to be orange and in addition they must be homologated.
LED traffic lights are more efficient and consume less energy than traditional halogen lights.
What are the advantages of the motorcycle led turn signal?
LED indicators for motorcycles have several advantages over traditional halogen indicators:
Longer lifespan: LEDs have a longer lifespan than halogen bulbs, which means they need to be replaced less often.
Lower Power Consumption: LED turn signals consume less power than halogen turn signals, which means they don't drain the motorcycle's battery as much.
Increased Brightness: LED turn signals produce a brighter, more visible light than halogen turn signals, increasing road safety.
Weather resistance: LEDs are more weather and impact resistant than halogen bulbs, making them more reliable.
Modern design: LED turn signals can offer a more modern and discreet design, especially integrated turn signals and mini turn signals.
Energy efficiency: LEDs have higher energy efficiency compared to traditional halogens, this means they use less energy to produce the same amount of light.
How to put turn signals on a motorcycle?
To install motorcycle turn signals, you will usually need to follow these steps:
Determine where you want to install the turn signals. Motorcycle turn signals are usually installed on handlebar grips or headlight brackets, depending on the motorcycle model.
Gather the necessary tools . You will need a screwdriver, spanner and electrical cables as well as connectors if necessary.
Remove the parts needed to access the motorcycle turn signal installation locations. This can include screws, bolts or brackets.
Install the turn signal brackets in the chosen locations. Make sure the brackets are securely fastened .
Connect the electric cables of the motorcycle indicators to the corresponding wires of the motorcycle using the connectors provided.
Test the turn signals to verify that they are working properly.
It is important to follow the manufacturer's instructions and check if your motorcycle requires the addition of resistors for proper operation.
Which resistor for motorcycle LED indicators?
Motorcycle LED turn signals may require the use of a load resistor or series resistor module to function properly. This is necessary because LED turn signals have a lower resistance than traditional halogen turn signals and can cause electronic problems if connected directly to the motorcycle's electrical system.
There are different types of load resistors for motorcycle LED turn signals, but they all have the function of limiting the current flowing through the wires of the turn signals. This protects the electronics of the motorcycle and guarantees correct operation of the LED turn signals.
The resistance value will depend on the motorcycle model and the type of motorcycle turn signal used. It is therefore important to refer to the installation guide or seek advice from a professional to choose the appropriate resistance for your motorcycle. It is also possible to find LED motorcycle turn signal installation kits that already include the appropriate resistors.
To calculate the resistance needed for an electrical circuit, it is necessary to know the voltage (U), the current (I) and the resistance (R) desired.
The formula used to calculate the resistance is R = U / I.
For example, if the voltage is 12V and the desired current is 0.1A, the resistance needed would be 120 Ohm.
It is important to note that the value of the resistor must be chosen according to the components used in the circuit and taking into account the allowable temperature and current limits. It is therefore best to seek advice from a professional or refer to user guides to avoid errors.
How does a motorcycle turn signal unit work?
A motorcycle flasher unit is an electronic device that is used to control the operation of the turn signals. It is connected to the turn signal switches on the handlebar grips, and generates an electrical signal to activate the turn signals.
Motorcycle flasher units can have different functionality, but generally they control both front and rear turn signals. It generates a signal to activate the turn signals when the switch is activated. There are also LED indicator units to avoid the use of a resistor.
It is important to note that the operation of indicators on a motorcycle is regulated and that the indicator units must comply with the standards and regulations in force in each country to guarantee road safety . It is therefore important to check the conformity of your motorcycle flasher unit before using it.
How to choose your motorcycle led turn signals?
There are many factors to consider when choosing LED turn signals for your motorcycle. Here are some things to consider:
Compliance with standards and regulations: Make sure that the LED indicators you choose comply with the standards and regulations in force in your country to guarantee road safety.
T ype of turn signal: There are several types of led turn signal, make sure they are suitable for your model of motorcycle and your aesthetic preferences.
Brightness: opt for LED indicators that have sufficient brightness to be seen by other road users, this will increase your road safety.
Lifespan: LED turn signals generally have a longer lifespan than traditional halogens, which means they need to be replaced less often.
Energy consumption: LED indicators generally have lower energy consumption than halogen indicators, they drain your motorcycle's battery less.
Types of motorcycle indicators?
There are several types of motorcycle turn signals available on the market, each with their own advantages and characteristics:
Halogen turn signals: These turn signals are the most common and oldest on the market. They use a halogen bulb to produce an amber light. They are generally less expensive than other types of turn signals, but consume more power and have a shorter lifespan.
LED Turn Signals: LED turn signals are becoming increasingly popular as they have a longer lifespan and consume less power than halogen turn signals. They also produce brighter and more visible light, increasing road safety. They are generally more expensive than halogen turn signals.
Integrated indicators: Integrated indicators are signal lights integrated into the headlights, they are less bulky and are therefore more discreet on the motorcycle. They give a more modern and aesthetic look, they are generally more expensive than other types of indicators.
Mini motorcycle turn signals: Mini turn signals are small turn signals designed for motorcycles. They are generally more discreet and more aesthetic than traditional indicators and can easily be integrated into the line of the motorcycle.
Dynamic LED indicators: These indicators are equipped with an LED which produces an amber light and which can vary in intensity or speed to signal a change of direction or an overtaking manoeuvre. This further increases visibility and road safety.
Motorcycle Fork Turn Signals: Motorcycle fork turn signals are signal lights that are installed on the forks of the motorcycle, usually instead of the standard position which is on the handlebars. These turn signals can improve the aesthetics of the bike by blending in with the fork design and providing a more modern look.
Bar-end turn signals : Bar-end turn signals for motorcycles are signaling lights that are installed on the ends of the handlebar grips. They are generally more discreet and aesthetic than traditional indicators, and can easily be integrated into the design of the motorcycle.
Whether you are classic style or rather modern like the lighting strips with the scrolling indicators, you will find here a wide selection of vintage motorcycle indicators for your preparation.