Motorcycle Switch 25MM REMM 2.0 HD

Discover the new pair of vintage motorcycle controls for your motorcycle.

Here are the new commodos developed by REMMOTORCYCLE.

We have improved the controlsthanks to you, to your feedback and to our technical skills.

Thus, we are proud to present to you a best product, more pretty, more practical, more functional and more unique.

Therepair of commodos modern and minimalist,with registered design, was designed specifically for our solution.

What is a motorcycle switch?

The commodo is a part mounted on the handlebars which allows to check the electrical elements of the motorcycle: indicators, starter, lights etc...

Why change the controls?

The original commodos are often ugly, bulky and materials low quality, few manufacturers offer beautifully crafted controls.

Examples of installation of REMMOTORCYCLE controls:

What are the functions of REMMOTORCYCLE 2.0 controls?

The left commodo, also called motorcycle flashing switch is composed as follows:

• A button for the horn
• A switch to turn on the high beams
• One button for the left turn signal.

And on the rear part, a additional button is installed and can be used for headlight calls. It can be replaced by a self-locking button on request.

The simplified motorcycle switch on the right is composed of:

• A start button
• One button for the right turn signal
• A circuit breaker switch

And on the back part, A additional button is installed and can be used for counter for example.It can be replaced by a self-locking button on request.

The design of REMMOTORCYCLE 2.0 controls

The chassis of the 25MM model is made of ALUMINUM.
Push buttons and slide buttons are made of aluminum.

THEcommodos settle on ahandlebar 25mm / 1inch.The diameter being 25.4MM.

No wires to install, buttons to solder, sheath to slide:

THE son are already installed in a braided sheath.

You can install them on both sides, left and right.

How to install the 2.0 controls?

Installation of the controls is simple. Simply replace the original switches with the new ones then plug in the wires in place of the wires of the original switches and that's it.

A guide is provided.

My original turn signal controls work with a 3-position switch, what should I do?

You must install the controls with the module Axel Joost "Multi Flasher Relay" in order to take advantage of the push-button indicators.

Installation is simple, installation instructions are provided with the controls.

Product link.

For installation on a Harley-Davidson and motorcycles already having indicators on both sides, the module is not necessary.

Why change the way the turn signals work?

Push-button indicators, try them and adopt them.
More practical, easier to use, prettier, here are the arguments in their favor.

Thanks to the module Axel Joost "Multi Flasher Relay" the indicators can stop automatically and a warning function is added.

• Quick press on the flashing button: 4 flashes and the flashing lights stop automatically.
• Pressure from 0.5s to 1s on the flashing button: 30 Flashes and indicators stop automatically.
• Pressure greater than 1s, permanent lighting of the indicator.
• Pressing again turns off the indicator.
• Pressing the left and right flasher buttons at the same time activates the hazard lights (warning).

Are REMMOTORCYCLE 2.0 motorcycle controls compatible with my motorcycle?

These universal switches can be installed on all motorcycles and ideally on your harley, your Honda, your Triumph, your Yamaha, your BMW or any other brands with handlebars 25mm/1inch

If in doubt, ask us for advice.

Dimensions in picture:

Note :

Sold by 2/per pair.