A motorcycle speedometer is an instrument that displays the current speed of the motorcycle, as well as other information such as distance traveled, fuel consumption and total kilometers traveled.
It can also include several functions such as speedometer, total odometer, gear ratio indicator and tachometer (motorcycle tachometer).
It is usually mounted near the handlebars for easy reading by the rider.
Is the meter mandatory on a motorcycle?
There are different legal requirements for motorcycle equipment in different countries and regions.
In some countries, it is mandatory for motorcycles to be fitted with a functioning speedometer to comply with road safety standards.
In other countries it is not mandatory, but it is strongly recommended for driver safety.
It is therefore important to check local laws and regulations to find out if a motorcycle gps speedometer is mandatory.
What is the tachometer for on a motorcycle?
The motorcycle tachometer is used to measure the rotational speed of the engine. It can be associated with a digital motorcycle speedometer.
It usually displays speed in revolutions per minute (RPM). This information is important to the driver as it allows them to know what RPM the engine is currently operating at and to ensure that it does not exceed the recommended RPM limit to avoid engine damage.
The lap counter also allows the rider to make better use of the performance of his motorcycle, by indicating when it is best to change gears to obtain optimal acceleration.
It can also be used to adjust carburettors or electronic injection.
How to connect a universal motorcycle speedometer?
Hooking up a universal motorcycle speedometer will depend on the specific model you are using, but here are the general steps you should follow:
Before you start, make sure you have all the necessary tools and accessories , such as electrical cables, connectors and cable ties.
Remove the front cover to gain access to the original counter.
Remove the original meter by disconnecting the electrical connectors and loosening the retaining screws.
Install the Universal Meter by securing it securely with the supplied mounting screws.
Connect the universal meter wires to the corresponding connectors on the motor. Wire colors may vary by model , so it's important to check the user manual to find out which wire goes where.
Secure electrical cables in place with cable ties to prevent movement.
Test the meter to make sure it is working properly.
Replace the front cover.
It is important to note that wiring a universal meter can be complex (calibration as well) and require some electrical knowledge, so it is best to seek help from an experienced mechanic if you are unsure about you. It is also important to check local laws and regulations to find out if the use of a universal odometer is allowed on your motorcycle (for example you must respect the values of the original odometer, i.e. say that the new odometer must display the total mileage of the motorcycle).
How to calibrate a universal motorcycle speedometer?
Calibrating a universal motorcycle speedometer will depend on the specific model you are using, but here are the general steps you should follow:
Find a flat, open place to perform the calibration.
Start the engine and let it idle for a few minutes to warm up to normal operating temperature.
Use GPS or speed tracker app to measure motorbike moving speed.
Compare the speed measured by the GPS/app with the speed indicated by the universal speedometer.
If the speed measured by the GPS/app is different from that indicated by the universal speedometer, you will need to make adjustments to calibrate the speedometer.
To calibrate the computer, you will need to use the adjustment buttons (if present) to adjust the indicated speed to match that measured by the GPS/app.
Repeat steps 3-6 at different speeds to ensure the meter is calibrated correctly at different rpms.
Recheck the speed indicated by the speedometer after making adjustments to make sure it is properly calibrated .
What are the different types of universal motorcycle speedometer?
There are several types of universal motorcycle speedometers, each with its own characteristics and functions. The most common types include:
Speedometer: It displays the current speed of the motorcycle in kilometers per hour or miles per hour.
Total odometer: It displays the total distance traveled by the motorcycle since its acquisition.
Daily odometer: It displays the distance traveled by the motorcycle during a given day.
Tachometer: Or motorcycle tachometer, It displays the rotational speed of the engine in revolutions/minute (rpm).
Gear ratio indicator: It indicates the gear ratio currently selected on the gearbox.
Fuel gauge: It indicates the level of fuel remaining in the tank of the motorcycle.
Oil temperature gauge: It indicates the temperature of the engine oil.
Distance traveled counter: It displays the distance traveled since the last reset.
Fuel consumption meter: It displays the instantaneous or average fuel consumption.
GPS speedometer: It uses a GPS sensor to measure the speed of the motorcycle, it is often more accurate than conventional speedometers. There are also wireless gps speedometers, at least you will still have to power it and connect the various information (flashing signal, engine oil light, etc.).
These counters are often needle however we also have digital motorcycle counters and the mix of the two in order to combine the vintage look with technology. For more look and discretion, you can mount a mini motorcycle speedometer but be careful at the expense of readability.
We offer a wide choice of vintage motorcycle speedometers, choose the perfect model for your machine!