Raised motorcycle rear buckle Diameter 22 or 25, from 175 to 270 mm wide

Presentation of the short and raised motorcycle rear buckle

If you want to install a saddlewith raised rear or modify the form of your motorcycle, this product is ideal. 

There loop is a part to be attached to the rear of the motorcycle to close the framework.

This makes the rear part of the motorcycle more aesthetic.

The tilt angle is approximately 20°.

There motorcycle rear buckle is carried out by hand in steel. The steel is untreated. This model measures 22 or 25 mm in diameter.

Please note the width is not measured at the center distance but the external width or the distance at its widest.

The model is available in width: 175, 195, 215, 225, 235, 250 and 270 mm.

There rear motorcycle buckle raisedis perfect for giving a beautiful rear line to the motorcycle.

There motorcycle rear buckle is ideally installed by welding to the original frame or buckle.

Here is an illustration of a short loop:

The dimensions expressed correspond to the following dimensions:

Attention: The width expressed is the external width, distance between the ends of each side.

Features:

Material: steel

Color: Raw

Diameter: 22 or 25 mm

Length: +/- 20 cm

Note:

The buckle is raw, it may have superficial rust. This does not prevent its proper use.

Produced to order.